DOCS MENU

Home

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Style Settings

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

How to Add an Alert

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Hull

The Hull (Hull Moving Average) is a directional trend indicator. It captures the current state of the market and uses recent price action to determine if conditions are bullish or bearish relative to historical data. Developed by Alan Hull, it is an extremely fast and smooth-moving average that we will refer to as the Hull Band. In fact, the Hull almost eliminates lag altogether and manages to improve smoothing at the same time. Generally speaking, the Hull is used with values between 9 and 18. The lower the value the tighter and more choppy the Hull Band becomes. Conversely, the greater the value the more smooth and less choppy the Hull Band becomes. 

Signal Settings

Style Settings

MAs

The MAs or Moving Averages are Simple Moving Averages (SMAs) that are toggled at different lengths to help guide signals fired by the Hull. The 2 moving averages work on crossing values. So for example, if you have a Fast SMA of 5 and a Slow MA of 8, a signal will fire when they cross and in relation to the Hull as well as any other inputs you have used to generate signals. We recommend using no more than a value of 12 for the Fast SMA length and no more than a value of 26 for the Slow SMA Length. The closer and lower the signal values are the faster the signals will fire and the further the values are and higher the number the more sparse the values will fire. Generally speaking, the default settings are around 5 for the Fast SMA and 8 for the Slow SMA.

Signal Settings

Style Settings

ADX

ADX stands for Average Directional Movement Index and can be used to help measure the overall strength of a trend. The ADX indicator is an average of expanding price range values. Although the Core Signals Indicator has rather low values for the ADX, they can be greatly increased to only fire signals when the Price Action is trending. The ADX acts to smooth the signals and prevent chop by cancelling out signals that are not trending.

Signal Settings

Style Settings

OCC-TSI

OCC is also known as the Open Close Cross indicator is a multipurpose moving average cross indicator that is primarily designed for swing margin trading and scalping cryptocurrencies but can be adapted to a multitude of high volatility assets. This is combined with the TSI also known as the True Strength Indicator. These come with preset values that use Moving Average crossing values combined with our own calculation of the True Strength Indicator. This is used primarily either in combination with the HULL or as a stand-alone calculation to use for Scalping and other fast Price Action trading strategies.

Signal Settings

Style Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Style Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Timeframe Settings

The SR Lines can be adjusted by intensity for each timeframe. First the SR High, Medium, and Low levels can be toggled to be on or off. Then the ATR Length, Multiplier, and Volume Threshold can be individually adjusted to change the frequency of the SR levels and the intensity to which they are plotted. 

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Timeframe Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Auto Fibs

Description

Auto Fibs are an incredibly powerful tool that automatically plot “Fibonacci Retracement” levels on your charts. By adjusting the settings by the time frame you trade on and then “Deviation” and “Depth” you can adjust where this tool automatically plots on your chart. This can then be adjusted to not only use the traditional levels of the Fibonacci Retracements but also configured to use our “Master Fibs” values. This is an advanced trading technique that allows you to plot potential price action levels.

How to use

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Settings

The 2 most important settings regarding the Auto Fibs are Deviation and Depth. These values will effectively determine where the tool plots these ranges on your chart. Along with these settings you can also adjust whether or not you want it to extend the lines left or right, Reverse the values if you are using it for our “Master Fibs” strategy of price projection, how you want it to show the values, and where you wan the values to be shown on your chart. You can also adjust the values of the Auto Fibs where we have 22 separate fields for plotting values, line colors, and individual on/off ticks.

Indicator Settings

Terms & Conditions